Vertical Injection Molding Machine 25 Ton
Vertical Injection Moulding Machine Functional Advantages:
1. Vertical direct hydraulic clamping system is designed for accurate, safe operation, especially suitable for insert molding. With a double slide table or rotary design, put-in, take-out products, and molding finish at the same time, which is more safe and efficient for production, then reduces the cost of production.
2. High precision mold platen ( Parallelism/ flatness: 0.01/100mm), heavy-duty tie-bars, and low-pressure mold clamping work together to greatly extend
machine & mold life.
3. Nitride and NIP/Nitroflon-coated screws and barrels are long-lasting, robust, and provide superior acid/alkaline resistance. Heavy duty double cylinder injection unit is maintenance friendly and free of oil leaks.
4. All series adapted Variable pump +PQ valves enable energy savings of 30~50%.
5. Proportional hydraulic control system provides low noise, low energy consumption, and smooth machine movements with durable life.
| TECHNICAL SPECIFICATIONS AND PARAMETERS | |
| MODEL | TKS-25 |
| INJECTION UNIT | |
| Screw Diameter | 30 mm |
| Injection Pressure | 1260 kgf/cm2 |
| Injection Capacity | 74 cm3 |
| Injection Weight (P.S) | 85 GMS. |
| Injection Rate | 57 cc/s |
| Screw Speed | 0-150 r.p.m |
| Screw Stroke | 120mm |
| Nozzle Stroke | 150 mm |
| Nozzle Contact Force | 2.4 tf |
| CLAMPING UNIT | |
| Clamping System | Hydraulic |
| Clamping Force | 25 Ton |
| Clamping Stroke | 215 mm |
| Max. Mould Space | 360 mm |
| Min. Mould Height | 145 mm |
| Space Between Columns(mm) | 370×200 (HxV) |
| ELECTRICAL EQUIPMENT AND GENERAL | |
| Drive Motor (kw) | 3.7 (5HP) |
| Heater(kw) | 2.3 |
| Dimension Of Machine(m) | 1.25(L) x 1.0(W) x 2.9 (H) |
| Weight Of Machine(t) | 0.9 |
| Oil Tank Capacity(l) | 120 |
| Cooling Water (l/hr) | 600-800 |